I'm a Know Me pattern Designer

Get to Know Me…

I’m still pinching myself and my Fall pattern ME2006 is in stores!

When I got the call from Mimi I was having a very tough time still dealing with a miscarriage and had recently been relocated on my 9 to 5, 50 miles from my home. I’m not gonna lie, I cried a lot mainly because I was talking out my dreams with a sister a year or so before telling her I wanted to make my own patterns. After that conversation with my friend, I simply wrote down my goals and I didn’t think about it again until Mimi reached out.

Once the news got out about “The Big 4” now being “The Big 5” the love and support from the sewing community has been so amazing.

So how has being a Know Me designer been?

Well, keeping the big news a secret was really fun lol. Then there’s creating designs. I didn’t know when Mimi wanted designs or how any of the process would play out but I went to my sketches and I had about 10 designs ready. I sat on those designs for a few months (maybe more than a few lol) but when Mimi came back and said okay I need your fall designs I was more than ready.

I sent her like 3 designs and finally decided to go with my jacket/dress design. I absolutely love blazers, coats, and jackets so this look was it for me. In my mind I already knew how I wanted to style this pattern (both casual and dressed up).

Once the pattern drafting and instructions were complete, I received my pattern and then it was time to sew it up and photograph. After sewing, cutting out, and hacking so many patterns over the past 10 years it was surreal to now cut out and sew my own pattern. The only other time I have ever been so intentional and focused on sewing a garment was when I made my vow renewal dress. It was kinda easy and that’s when imposter syndrome kicked in. Having sew brothers and sisters to help navigate all the feels really helped during the process.

I have to talk about the pictures because y'all, my husband has never been labeled as my photographer but for my pattern pics…I needed him to step up. For those who don’t know, I take 99.5% of the pictures you see on my socials and here on my blog and I’m a photographer. I was not blessed with a partner who will tell me I have a wrinkle or this angle aint it honey. He will snap 100 of those bad shots with no words lol. A whole ass struggle y’all. We managed to finally get on the same page while shooting and he got some really good shots. So for that, I’m thankful.

Then there are the other amazing Know Me Designers who are sharing this experience with me. Everyone brings something different with their designs and I’m so honored to be apart of this group of creatives. I actually want to sew the mens patterns for hubs and that normally takes an act of God!

This journey is just getting started and Early Spring 23” is right around the corner. Thank you again to you all for supporting me on my creative journey. And thank you for supporting Know Me Patterns and all the designers.

Sew alongs are now live on the Know Me YouTube channel HERE

Shop Know Me Patterns Here or in craft stores like Joann!

Fabric: Spoonflower Velvet

Fabric: Suade

Fabric: Joann Denim

Feels Like Summer

My first fabric collection is here!

If you are following me on Instagram then you know I recently released my first collection of designs “Feels Like Summer” now available on the Spoonflower website!

My collection features a few of my favorite things and colors for summer. Obviously I’m obsessed with watermelon and my plant babies.

One of my first makes with my own design, I choose Watermelon Skin in original and pink background. You can find these prints in my Spoonflower design studio here.

Feels like summer has a total of 11 designs (some smaller scaling upon request). There are currently 3 variations of Watermelon skin, 3 variations of Hot Plant Summer, 3 variations of Bouquet, 1 Like Water, and 1 Colorful Feathers.

This collection was created and intended to mix and match prints with each other. For instance, the stripes in the Like Water design share the same colors as the Colorful Feathers design.

Hot Plant Summer would look beautiful with any mix of the 3 color ways . The Bouquet print features a large scale bouquet in green background, medium scale yellow background, and small scale nude background. I think it would be fun to mix the large scale with the small scale for a fun floral project.

The dress

For my first project I went with the Mimi G Simplicity pattern 8639 and Spoonflower Sport Lycra. While sport lycra is most used for swimwear, I love to also create dresses and activewear with this fabric. I used a strong power mesh lining for the bodice portion of the dress and a lighter weight mesh for the skirt. Overall the dress hugs my curves very nicely if I might say so myself.

The pattern is very straight forward and does also include an invisible zipper and darts in the back bodice. I feel if you aren’t the greatest with installing a zipper on stretchy fabrics, you can opt out of the zipper as long as the dress will stretch enough for you to put on the dress. The pattern instructions do not specify but some seams need a zigzag stitch and not a straight stitch. You don’t want your seams popping when you put the dress on and if you sew in complete straight stitches, this will happen.

Mimi G has a YouTube tutorial per usual that you can also refer to.

SpoonflOwer Fabric suggestions

1. My top choice in every print is Spoonflower Satin! I mean why not satin? Satin is lightweight, smooth, sexy (slip dress season) and perfect for maxis, blouses, and as my friend Seweu likes to say booty clappers. Lol

2. Sport Lycra is my next favorite because we’re making all the swimsuits this season right? But we can also make all the activewear and dresses with this one too.

3. All the knits Spoonflower offers are a great choice, Modern Jersey being high on my list for color boldness.

4. Chiffon and Poly Crepe de Chine are also perfect for those flowy lightweight blouses, coverups, and dusters for summer.

5. The Lightweight Cotton Twill has won me over in the bottom weight fabric category. I have plans to make several boiler suits and jumpsuit with this fabric.

6. Cotton Poplin and Cotton Lawn are great for all those gathered, big, puffy sleeves we want this summer.

I love creating new designs so this is only the beginning. My next collection will be dropping soon!!

Please subscribe to my newsletter so you can stay up to date with new drops. I’m so excited to share this portion of my creativity with you all and I can’t wait to see what you create!! Thank you for stopping by and your continued support.

Happy Summer!!

Purple Rain-Bow

Welcoming Spring

This Spring I’m all about the many shades of purple! I’ve been sleeping on this purple stretch corduroy from Melanated Fabrics all winter and finally decided on the perfect match. Sorry they’re all out of this purple but there are a few other colors to choose from. I used McCalls 7997 to create this look and the darts on this one help to give the dress a little more shape for those curves. If darts aren’t your strong points, check out this method I use to cut the dart portions out of the pattern pieces for easy markings.

There’s quite a bit of handsewing for the hem, sleeves, and lining. So if handsewing isn’t your jam, I’d get ready for it with this pattern. I managed to sit and handsewing the entire dress while watching a movie. The buttonholes were also fun (not). Corduroy can be tricky and with this being a stretch corduroy, the fabric wasn’t as firm as I would like for a buttonhole. You can strengthen your buttonholes by adding cording or a stronger interfacing on your front facing.

Overall, this was an average sewing project. There aren’t welt pockets but if you want to get jazzy you could definitely add them.

Tip: I cut out the front facing pattern piece with angle incorrectly. I was definitely not paying close attention. So you want to be sure if you’re sewing this version, to cut the slanted facing piece correctly. The same goes for your lining. Luckily I had enough corduroy to cut out one more facing on the correct side.

I hope you enjoyed my Purple Rain-bow lewk! Until next time,

Peace & Blessings!

Drippin’ Rainbows

A LATE BUT COLORFUL START TO THE NEW YEAR

I finally managed to blog for the start of 2021 and oh how great it feels to share this creation with you all. If you have been following me on IG then you are aware that I am one of the new Spoonflower Ambassador’s for 2021! I couldn’t be more excited and thankful. 2021 is my year of rainbows! Each year I focus on expanding my wardrobe with one particular color that I’m craving or lacking. So it was only fitting that after all the rain in 2020, we deserve Rainbows in 2021, right?

Construction

Does this boiler suit look familiar? Well it is the same pattern used for my Fall Florals. You can check out deets and tips there.
In today’s blog I want to highlight this yummy Spoonflower Dogwood Denim™️ from the Katie Kortman Rainbow collection. I’ve made this boiler suit 3 times so far and this time I needed denim. I had a huge fabric haul from Spoonflower just before the year came to an end and I decided to try out the Dogwood Denim this go round. You can find this exact fabric here. I’m not disappointed at all and it softens once you wash. But let’s talk about color! The colors in this watercolor design are bold and vibrant. I had the most fun matching the prints. Luckily, I had plenty of fabric…well just enough fabric.

The pink shades in this print reminded me that I had an old pair of jeans that I could no longer squeeze into and I decided to use them for the under collar and back yoke. I added a third row of topstitching to give the suit a little more detail. It’s not my best topstitching but I survived!

So what did I do differently on this boiler? I did not add an inside zipper facing and I made the sleeves quarter length instead of full length. There’s also the obvious print matching which turned out lovely and very rewarding. If you can’t find the pockets right away then my job is complete.

The Dogwood Denim does not have any stretch by the way but I’m sure it will make a great pair of classic jeans.
Alright alright, I’ll let you finally get into the Rainbow!

I hope that you enjoyed my drippin rainbow and I’d love to hear from you below. Until next time,

peace & blessings

National Flannel Day

Are you a flannel addict?

I didn’t realize how much I actually love flannel. So much so, I think it’s only right to make December 25th National Flannel Day!
I mean how many of you, your friends, and family were rockin flannel on Christmas Eve and Christmas? Errrbody, lol.
I have had this quilted flannel fabric for over two years now and finally decided I needed to bring it to life. On one of my IG scrolls I saw Mimi G’s throwback of her flannel bomber jacket with casual sneaks and shades and I remembered why I bought the fabric in the first place.

Let’s Talk construCtion

So I have flannel fabric but didn’t have gray for the cuffs and the collar…or did I? Okay, here’s a tip if you want to recreate this look and don’t want to buy the gray fabric like me. Hubs was literally throwing out old gray sweatshirts that were actually not very old at all and I looked at them (being the fabric hoarder I am) and said ummm I can repurpose these. So…I did!

There were vinyl lettering on some parts of the sweatshirts but I manage to find enough space to cut (in the appropriate stretch direction) the two pattern pieces needed for the collar and cuffs. This quilted flannel is nice and fluffy and it is definitely keeping me warm even in below 30 degree weather.

If you caught my previous blog then you will notice I also used the same animal print fabric as my Jogger Season bomber for lining (no fabric left behind).

To match or not to match? that’S the question

Here’s where some sewers may say flannel matching, HELL NO! I’m usually HELL YES!! The sizing of the flannel in this fabric is not too small where I feel I can’t pattern match but if it were smaller, I might rethink that idea. But guess what? If you don’t want to pattern match flannel that’s okay and that’s yo business! I managed and purposely patterned matched this jacket with the exception of the shoulder and sleeves seams. I tried but my eyes eventually said that’s enough honey!
Below you can see for my zipper install I stitched down one side of the separating zipper and then marked the remaining unsewn zipper piece on the wrong side of the zipper where patterns match. This helps me to eliminate pulling out my seam ripper because my prints aren’t lining up once zipped together.
I live for an exposed zipper and I had a nice gray zipper handy so I stitched a little closer to the edge than the pattern called for.
If you made it this far I bet you’re also wondering if I used a pattern? Yes I did use a pattern but I didn’t follow it to a tee. This pattern by Nikki Brooks of Beaute’ J’adore M7636 is one of my faves. I opted out of the cording and made the sleeves one pattern piece instead of two. I do want to add that if you have a basic shirt sloper you can achieve this look without this pattern. You would need to make sure the fit is to your liking (baggy or fitted) and cut down the middle of the front piece to add a zipper. You would also need to factor in length to fold up to create the waistband of the jacket and pockets if you choose. I like welt pockets for bombers but I didn’t want to make time to insert them this go round.

The jacket has a few seams and in my opinion can be sewn within a few hours (not including cutting). I managed to cut and sew both jacket and lining, with zipper install in under 3 hours but I was rolling lol.

I think this pattern is easy to moderate depending on confidence with zippers, pleating (sleeves), and cording (if using). I would definitely recommend it and once you try it, you will probably use it again and again.

I hope you all enjoyed this creation. Tell me what you think below. I’d love to hear from you.

Until next YEAR!! Bye 2020

Peace & Blessings

Jogger Season

Jogger Season

I can’t help but want to wear sweats and jogging suits right now but I also need my pumps. That’s the beauty of a jogger set! You can be comfy and sexy all at once or you can dress it down with sneakers. However you choose, these babies are staples in my wardrobe.

When ideas come to life

This project started with a sketch but before the sketch I saw an amazing designer named Prep Curry rockin his custom floral jogger set and I knew I had to make one for myself. So I shopped my stash and found floral, green, blue, and white fabric. I have had all these fabrics for a few years now and finally found something to create with them. I sketched out the jacket late last year and just never got around to sewing it up. Most of my ideas for contrasting fabrics arise because I simply don’t have enough fabric to make an entire garment so I think of ways to spice it up. This was the case with the floral print. When I purchased it, I had no idea what I was going to make and when it came time to create I couldn’t find the fabric anywhere (I looked for about 1 day total lol). So I had about 2 yards of the floral fabric and based my sketch off of that. Initially, I didn’t think I had enough floral to add to the sleeves but I’m so happy I was able to squeeze it in. As for my solid color fabrics, I had plenty for this project so I wasn’t playing Tetris. My initial design I added a pink contrast but when I went shopping for this shade I didn’t find the perfect fabric at local stores so I just scratched pink off my design. I also didn’t want to spend much on this project.
I’m often asked how do I come up with contrasting looks, mixing colors, and prints? Well sometimes it’s really me just making what I already have work. Other times I actually plan out color palettes and design and source from there. I really just like to have fun with colors and prints and don’t like following rules.

Let’s Sew

I used Mimi G’s Simplicity pattern 8702 for both the pants and the bomber jacket. I switched up the design in the front for the jacket a bit by cutting and taping pattern pieces in the direction I wanted for each contrast. When doing this type of hack, be sure to add or subtract seem allowance where necessary. It takes a little more time but the outcome is worth it. I shared some of this process for the pants contrast on my Instagram IGTV video here! I serged the side seems on the pants but I used a straight stitch for the contrast to help everything lay flat. The pants for this pattern are meant to be fitted and also have a zipper at the ankle. I went up a size because I wanted a slight loose fit and instead of the zipper on the ankle I added rainbow ribbed knit (purchased on Amazon).
Like majority of Mimi G’s simplicity patterns, there was a video tutorial for the entire set on YouTube. I have made this jogger set once before so I was confident sewing it for the second time.
The pattern doesn’t have pockets and ya girl needs pockets! So I added welt pockets to the bomber jacket. You could even add pockets to the pants. I personally found it easier to just add pockets to the jacket. I would’ve had to get a little more creative with pockets on the pants since the middle side section (animal print) is not perfectly centered for pocket placement on a seem. Whatever your preference, I say do you!

Welt pocket Install

POCKETS PLEASE!

Overall I had so much fun creating this look! The lining gave me the pop I wanted on the inside and I will definitely keep warm wearing this through the winter.

Will I make it for a 3rd time? Absolutely! I feel this pattern can be beginner friendly as long as you don’t get too intimidated by the zippers and follow along with Mimi. I hope you all enjoyed this creation. Tell me what you think below. I’d love to hear from you.

Until next time

Peace & Blessings

OLIVE OIL

fall ATHLEISURE

Greetings friends! It’s officially fall here and what I love the most about the fall breeze and the beautiful leaves is getting grounded outdoors!

I just recently became the proud owner of a Peloton (oh hey new side abs) and I couldn’t help but crave new workout gear. So I went through my pattern stash and found Simplicity #8560 and Mccalls #7482.

Prep

I love this sports bra pattern because it gives the option to change the cup size which is very important for me. I don’t know about y’all but my DD’s don’t always fit comfortably into store bought sports bras. The pattern called for me to use cup size F but I used size 36 with an E cup to test the waters. My bra size is 36DD. For fabric choice, I used an olive green ponte knit I had on hand and a funky, I think neoprene fabric also from my stash. I only had 1.5 yds of the print and I’m stoked I was able to slightly pattern match with the pants (thank God the width of the fabric was 60”).
Okay so now for the fun part, threading my serger to a flatlock stitch! For the entire pants pattern I used Erica Bunker’s M7482 YouTube tutorial. It was a game changer y’all! In this tutorial Erica used a 2-thread flatlock stitch (see here) but my serger wasn’t having it so I went with 3-threads. If you have a serger and don’t have a cover-stitch machine you can definitely pull off the look with these sergering tips. If you’re anything like me you didn’t know the flatlock stitch existed until recently. I also didn’t know how rewarding it would be to pull the seams apart! I’m not kidding, it’s like magic lol.

Construction

I made the pants first and you wouldn’t believe they were actually a very quick make going along with Erica’s tutorial but keep in mind the higher the tension on your serger, the more likely you are to experience the thread popping. Hell, I know mind did and it was not fun doing the entire seam over or pulling out the seam ripper (insert red mad face emoji).

For my sports bra I did not use the flatlock stitch. For the very first seam on the bust I tested out a stretch stitch suggested for knits on my Bernina and I didn’t like the way the seam laid. I thought about serging the entire bra but decided not to. When you’re sewing knits you normally use the zig-zag stitch or serger and I did not on a few seams. One seam being the bust and side seam. I used 3.2 stitch length and it worked out fine for me. I like to think the straight stitch in the bust helped to support the girls better. Keep in mind the stretch is different for every knit fabric type. A straight stitch might not be the best option for you. I made a second sports bra with swimwear jersey and serged every stitch and the support is not as strong. Honestly this is something you have to test out for yourself. I used view A and view C because I loved the crisscross front and back. I went without the topstitching around the edges because that’s my business, lol. I cut the back straps out at size 36 but I would suggest going down a size or two for the back straps (they were not as fitted as I expected).
Technically, the sports bra is lined but I used the same olive green fabric for the lining and I know that also added support. This is also a preference and you can choose to use performance stretch lining or a mesh stretch fabric.
I found a few old bras I could no longer wear and cut the closures off of them. The pattern calls for the closures to be more hidden and only has one row of closures. I used 2 rows, also preference. I got lazy and did not hand sew back connectors to the closures. If your machine gets close enough and you don’t break needles, go for it but handsewing is best. For my second sports bra with this same pattern, I only use 1 row of closures and I did handsew….it looks a lot neater lol.

Overall

You can conquer athleisure/workout gear! Is my first sports bra perfect? Not quite. But guess what? Practice makes better, makes perfect! I know lots don’t usually want to try their sewing hands at knits and activewear but you’ve gotta start somewhere. The tips and tools are out there for help and you don’t have to have a coverstitch or even a serger to sew activewear but if you have either, just do it! My hope is to inspire you to give it a go or pull out that UFO you gave up on years ago and practice.

As always thanks for stopping by. Tell me your thoughts on sewing activewear in the comments. I’d love to hear about it!

Peace & Blessings!

Fall Florals

Fall Florals

Who says you can’t be colourful in the Fall?

Greetings! It’s finally fall and I like to migrate my vivid summer colours all year round. So for my first official fall make I wanted to use this Telio denim cotton from fabricdotcom. I had to have it (I also snagged it in yellow). So what to make? I have 8 yards of this amazing fabric and the first thing I thought of was a jumpsuit!

I choose the Intrepid Boiler Suit by Alice & Co with the zipper and elastic waist option. What I love about this PDF pattern and the instructions is that it has a few different options for creating this jumpsuit. The main option is with an exposed zipper. You can also add a facing for inside the zipper and the instructions break down how. I added the zipper facing and bias binding to majority of my seam allowances for a more detailed look on the inside.

I won’t get too heavy into the construction of the pattern because I feel the instructions were pretty good. I did notice that when attaching the pants to the bodice there is more than enough space to make adjustments. I personally added 1.5 inches to the waist length of my pants because I have long legs. Even with adding the extra inches, I still needed to bring down the seam allowance for the bodice and pants seam. What I noticed for myself is, I needed a baggier fit in the booty and sewing based on the instructions, my boiler suit was definitely giving me more of a wedgie.

Tip: Until you see what seam allowance width is best for your body, this would be a seam to baste stitch instead of stitching at regular stitch length.
Tip: select a longer zipper if you’re taller so you can remove this jumpsuit easier for bathroom trips! I usually use a zipper 2-4” longer than what the pattern calls for. If it’s too long you can always remove teeth and shorten but if it’s too short…well, you’ll be upset you have to get a longer zipper.

I have made this boiler suit once before and have yet to wear it because I want to add bigger pockets for the butt (the original pocket do seem small to me). As far as additions and spicing this boiler suit up a bit, I plan on creating another version with pocket flaps, a loop to catch the the sleeves when folded, and instead of elastic in the waist try a tie belt. I hope you all enjoyed this look and I would love to hear your thoughts on this pattern. Are you jumping on the Boiler suit train? I hope you are welcoming Fall with lots of colour! Until next time,

Peace & Blessings!